wip

2024-04-27 03:19:19 -05:00
parent df418b503f
commit 03af7b6107
306 changed files with 108529 additions and 119 deletions
--- a/panda/board/flasher.h
+++ b/panda/board/flasher.h
@@ -0,0 +1,150 @@
+// flasher state variables
+uint32_t *prog_ptr = NULL;
+bool unlocked = false;
+
+void spi_init(void);
+
+int comms_control_handler(ControlPacket_t *req, uint8_t *resp) {
+  int resp_len = 0;
+
+  // flasher machine
+  memset(resp, 0, 4);
+  memcpy(resp+4, "\xde\xad\xd0\x0d", 4);
+  resp[0] = 0xff;
+  resp[2] = req->request;
+  resp[3] = ~req->request;
+  *((uint32_t **)&resp[8]) = prog_ptr;
+  resp_len = 0xc;
+
+  int sec;
+  switch (req->request) {
+    // **** 0xb0: flasher echo
+    case 0xb0:
+      resp[1] = 0xff;
+      break;
+    // **** 0xb1: unlock flash
+    case 0xb1:
+      if (flash_is_locked()) {
+        flash_unlock();
+        resp[1] = 0xff;
+      }
+      current_board->set_led(LED_GREEN, 1);
+      unlocked = true;
+      prog_ptr = (uint32_t *)APP_START_ADDRESS;
+      break;
+    // **** 0xb2: erase sector
+    case 0xb2:
+      sec = req->param1;
+      if (flash_erase_sector(sec, unlocked)) {
+        resp[1] = 0xff;
+      }
+      break;
+    // **** 0xc1: get hardware type
+    case 0xc1:
+      resp[0] = hw_type;
+      resp_len = 1;
+      break;
+    // **** 0xc3: fetch MCU UID
+    case 0xc3:
+      (void)memcpy(resp, ((uint8_t *)UID_BASE), 12);
+      resp_len = 12;
+      break;
+    // **** 0xd0: fetch serial number
+    case 0xd0:
+      // addresses are OTP
+      if (req->param1 == 1) {
+        memcpy(resp, (void *)DEVICE_SERIAL_NUMBER_ADDRESS, 0x10);
+        resp_len = 0x10;
+      } else {
+        get_provision_chunk(resp);
+        resp_len = PROVISION_CHUNK_LEN;
+      }
+      break;
+    // **** 0xd1: enter bootloader mode
+    case 0xd1:
+      // this allows reflashing of the bootstub
+      switch (req->param1) {
+        case 0:
+          print("-> entering bootloader\n");
+          enter_bootloader_mode = ENTER_BOOTLOADER_MAGIC;
+          NVIC_SystemReset();
+          break;
+        case 1:
+          print("-> entering softloader\n");
+          enter_bootloader_mode = ENTER_SOFTLOADER_MAGIC;
+          NVIC_SystemReset();
+          break;
+      }
+      break;
+    // **** 0xd6: get version
+    case 0xd6:
+      COMPILE_TIME_ASSERT(sizeof(gitversion) <= USBPACKET_MAX_SIZE);
+      memcpy(resp, gitversion, sizeof(gitversion));
+      resp_len = sizeof(gitversion);
+      break;
+    // **** 0xd8: reset ST
+    case 0xd8:
+      flush_write_buffer();
+      NVIC_SystemReset();
+      break;
+  }
+  return resp_len;
+}
+
+void comms_can_write(const uint8_t *data, uint32_t len) {
+  UNUSED(data);
+  UNUSED(len);
+}
+
+int comms_can_read(uint8_t *data, uint32_t max_len) {
+  UNUSED(data);
+  UNUSED(max_len);
+  return 0;
+}
+
+void refresh_can_tx_slots_available(void) {}
+
+void comms_endpoint2_write(const uint8_t *data, uint32_t len) {
+  current_board->set_led(LED_RED, 0);
+  for (uint32_t i = 0; i < len/4; i++) {
+    flash_write_word(prog_ptr, *(uint32_t*)(data+(i*4)));
+
+    //*(uint64_t*)(&spi_tx_buf[0x30+(i*4)]) = *prog_ptr;
+    prog_ptr++;
+  }
+  current_board->set_led(LED_RED, 1);
+}
+
+
+void soft_flasher_start(void) {
+  print("\n\n\n************************ FLASHER START ************************\n");
+
+  enter_bootloader_mode = 0;
+
+  flasher_peripherals_init();
+
+  gpio_usart2_init();
+  gpio_usb_init();
+
+  // enable USB
+  usb_init();
+
+  // enable SPI
+  if (current_board->has_spi) {
+    gpio_spi_init();
+    spi_init();
+  }
+
+  // green LED on for flashing
+  current_board->set_led(LED_GREEN, 1);
+
+  enable_interrupts();
+
+  for (;;) {
+    // blink the green LED fast
+    current_board->set_led(LED_GREEN, 0);
+    delay(500000);
+    current_board->set_led(LED_GREEN, 1);
+    delay(500000);
+  }
+}