wip

panda/drivers/linux/README.md

@@ -0,0 +1,28 @@
+# Linux driver
+Installs the panda linux kernel driver using DKMS.
+
+This will allow the panda to work with tools such as `can-utils`
+
+## Prerequisites
+ - `apt-get install dkms gcc linux-headers-$(uname -r) make sudo`
+
+## Installation
+ - `make all`
+ - `make link` (optional, setup to build/install when kernel is updated)
+
+## Uninstall
+ - `make clean`
+
+## Usage
+
+You will need to bring it up using `sudo ifconfig can0 up` or
+`sudo ip link set dev can0 up`, depending on your platform.
+
+Note that you may have to setup udev rules for Linux
+``` bash
+sudo tee /etc/udev/rules.d/11-panda.rules <<EOF
+SUBSYSTEM=="usb", ATTRS{idVendor}=="bbaa", ATTRS{idProduct}=="ddcc", MODE="0666"
+SUBSYSTEM=="usb", ATTRS{idVendor}=="bbaa", ATTRS{idProduct}=="ddee", MODE="0666"
+EOF
+sudo udevadm control --reload-rules && sudo udevadm trigger
+```