openpilot v0.9.6 release

date: 2024-01-12T10:13:37
master commit: ba792d576a49a0899b88a753fa1c52956bedf9e6

panda/board/boards/board_declarations.h

@@ -0,0 +1,77 @@
+// ******************** Prototypes ********************
+typedef enum {
+  BOOT_STANDBY,
+  BOOT_BOOTKICK,
+  BOOT_RESET,
+} BootState;
+
+typedef void (*board_init)(void);
+typedef void (*board_init_bootloader)(void);
+typedef void (*board_enable_can_transceiver)(uint8_t transceiver, bool enabled);
+typedef void (*board_enable_can_transceivers)(bool enabled);
+typedef void (*board_set_led)(uint8_t color, bool enabled);
+typedef void (*board_set_can_mode)(uint8_t mode);
+typedef bool (*board_check_ignition)(void);
+typedef uint32_t (*board_read_current)(void);
+typedef void (*board_set_ir_power)(uint8_t percentage);
+typedef void (*board_set_fan_enabled)(bool enabled);
+typedef void (*board_set_siren)(bool enabled);
+typedef void (*board_set_bootkick)(BootState state);
+typedef bool (*board_read_som_gpio)(void);
+
+struct board {
+  const char *board_type;
+  const harness_configuration *harness_config;
+  const bool has_hw_gmlan;
+  const bool has_obd;
+  const bool has_spi;
+  const bool has_canfd;
+  const bool has_rtc_battery;
+  const uint16_t fan_max_rpm;
+  const uint16_t avdd_mV;
+  const bool fan_stall_recovery;
+  const uint8_t fan_enable_cooldown_time;
+  board_init init;
+  board_init_bootloader init_bootloader;
+  board_enable_can_transceiver enable_can_transceiver;
+  board_enable_can_transceivers enable_can_transceivers;
+  board_set_led set_led;
+  board_set_can_mode set_can_mode;
+  board_check_ignition check_ignition;
+  board_read_current read_current;
+  board_set_ir_power set_ir_power;
+  board_set_fan_enabled set_fan_enabled;
+  board_set_siren set_siren;
+  board_set_bootkick set_bootkick;
+  board_read_som_gpio read_som_gpio;
+};
+
+// ******************* Definitions ********************
+// These should match the enums in cereal/log.capnp and __init__.py
+#define HW_TYPE_UNKNOWN 0U
+#define HW_TYPE_WHITE_PANDA 1U
+#define HW_TYPE_GREY_PANDA 2U
+#define HW_TYPE_BLACK_PANDA 3U
+#define HW_TYPE_PEDAL 4U
+#define HW_TYPE_UNO 5U
+#define HW_TYPE_DOS 6U
+#define HW_TYPE_RED_PANDA 7U
+#define HW_TYPE_RED_PANDA_V2 8U
+#define HW_TYPE_TRES 9U
+
+// LED colors
+#define LED_RED 0U
+#define LED_GREEN 1U
+#define LED_BLUE 2U
+
+// USB power modes (from cereal.log.health)
+#define USB_POWER_NONE 0U
+#define USB_POWER_CLIENT 1U
+#define USB_POWER_CDP 2U
+#define USB_POWER_DCP 3U
+
+// CAN modes
+#define CAN_MODE_NORMAL 0U
+#define CAN_MODE_GMLAN_CAN2 1U
+#define CAN_MODE_GMLAN_CAN3 2U
+#define CAN_MODE_OBD_CAN2 3U