brianhansonxyz/oscarpilot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

openpilot v0.9.6 release

Browse Source 
date: 2024-01-12T10:13:37
master commit: ba792d576a49a0899b88a753fa1c52956bedf9e6
This commit is contained in:
FrogAi
2024-01-12 22:39:28 -07:00
commit 08e9fb1edc
1881 changed files with 653708 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

164
selfdrive/car/gm/carcontroller.py Normal file
View File

@@ -0,0 +1,164 @@
from cereal import car
from openpilot.common.conversions import Conversions as CV
from openpilot.common.numpy_fast import interp
from openpilot.common.realtime import DT_CTRL
from opendbc.can.packer import CANPacker
from openpilot.selfdrive.car import apply_driver_steer_torque_limits
from openpilot.selfdrive.car.gm import gmcan
from openpilot.selfdrive.car.gm.values import DBC, CanBus, CarControllerParams, CruiseButtons
VisualAlert = car.CarControl.HUDControl.VisualAlert
NetworkLocation = car.CarParams.NetworkLocation
LongCtrlState = car.CarControl.Actuators.LongControlState
# Camera cancels up to 0.1s after brake is pressed, ECM allows 0.5s
CAMERA_CANCEL_DELAY_FRAMES = 10
# Enforce a minimum interval between steering messages to avoid a fault
MIN_STEER_MSG_INTERVAL_MS = 15
class CarController:
def __init__(self, dbc_name, CP, VM):
self.CP = CP
self.start_time = 0.
self.apply_steer_last = 0
self.apply_gas = 0
self.apply_brake = 0
self.frame = 0
self.last_steer_frame = 0
self.last_button_frame = 0
self.cancel_counter = 0
self.lka_steering_cmd_counter = 0
self.lka_icon_status_last = (False, False)
self.params = CarControllerParams(self.CP)
self.packer_pt = CANPacker(DBC[self.CP.carFingerprint]['pt'])
self.packer_obj = CANPacker(DBC[self.CP.carFingerprint]['radar'])
self.packer_ch = CANPacker(DBC[self.CP.carFingerprint]['chassis'])
def update(self, CC, CS, now_nanos):
actuators = CC.actuators
hud_control = CC.hudControl
hud_alert = hud_control.visualAlert
hud_v_cruise = hud_control.setSpeed
if hud_v_cruise > 70:
hud_v_cruise = 0
# Send CAN commands.
can_sends = []
# Steering (Active: 50Hz, inactive: 10Hz)
steer_step = self.params.STEER_STEP if CC.latActive else self.params.INACTIVE_STEER_STEP
if self.CP.networkLocation == NetworkLocation.fwdCamera:
# Also send at 50Hz:
# - on startup, first few msgs are blocked
# - until we're in sync with camera so counters align when relay closes, preventing a fault.
# openpilot can subtly drift, so this is activated throughout a drive to stay synced
out_of_sync = self.lka_steering_cmd_counter % 4 != (CS.cam_lka_steering_cmd_counter + 1) % 4
if CS.loopback_lka_steering_cmd_ts_nanos == 0 or out_of_sync:
steer_step = self.params.STEER_STEP
self.lka_steering_cmd_counter += 1 if CS.loopback_lka_steering_cmd_updated else 0
# Avoid GM EPS faults when transmitting messages too close together: skip this transmit if we
# received the ASCMLKASteeringCmd loopback confirmation too recently
last_lka_steer_msg_ms = (now_nanos - CS.loopback_lka_steering_cmd_ts_nanos) * 1e-6
if (self.frame - self.last_steer_frame) >= steer_step and last_lka_steer_msg_ms > MIN_STEER_MSG_INTERVAL_MS:
# Initialize ASCMLKASteeringCmd counter using the camera until we get a msg on the bus
if CS.loopback_lka_steering_cmd_ts_nanos == 0:
self.lka_steering_cmd_counter = CS.pt_lka_steering_cmd_counter + 1
if CC.latActive:
new_steer = int(round(actuators.steer * self.params.STEER_MAX))
apply_steer = apply_driver_steer_torque_limits(new_steer, self.apply_steer_last, CS.out.steeringTorque, self.params)
else:
apply_steer = 0
self.last_steer_frame = self.frame
self.apply_steer_last = apply_steer
idx = self.lka_steering_cmd_counter % 4
can_sends.append(gmcan.create_steering_control(self.packer_pt, CanBus.POWERTRAIN, apply_steer, idx, CC.latActive))
if self.CP.openpilotLongitudinalControl:
# Gas/regen, brakes, and UI commands - all at 25Hz
if self.frame % 4 == 0:
stopping = actuators.longControlState == LongCtrlState.stopping
if not CC.longActive:
# ASCM sends max regen when not enabled
self.apply_gas = self.params.INACTIVE_REGEN
self.apply_brake = 0
else:
self.apply_gas = int(round(interp(actuators.accel, self.params.GAS_LOOKUP_BP, self.params.GAS_LOOKUP_V)))
self.apply_brake = int(round(interp(actuators.accel, self.params.BRAKE_LOOKUP_BP, self.params.BRAKE_LOOKUP_V)))
# Don't allow any gas above inactive regen while stopping
# FIXME: brakes aren't applied immediately when enabling at a stop
if stopping:
self.apply_gas = self.params.INACTIVE_REGEN
idx = (self.frame // 4) % 4
at_full_stop = CC.longActive and CS.out.standstill
near_stop = CC.longActive and (CS.out.vEgo < self.params.NEAR_STOP_BRAKE_PHASE)
friction_brake_bus = CanBus.CHASSIS
# GM Camera exceptions
# TODO: can we always check the longControlState?
if self.CP.networkLocation == NetworkLocation.fwdCamera:
at_full_stop = at_full_stop and stopping
friction_brake_bus = CanBus.POWERTRAIN
# GasRegenCmdActive needs to be 1 to avoid cruise faults. It describes the ACC state, not actuation
can_sends.append(gmcan.create_gas_regen_command(self.packer_pt, CanBus.POWERTRAIN, self.apply_gas, idx, CC.enabled, at_full_stop))
can_sends.append(gmcan.create_friction_brake_command(self.packer_ch, friction_brake_bus, self.apply_brake,
idx, CC.enabled, near_stop, at_full_stop, self.CP))
# Send dashboard UI commands (ACC status)
send_fcw = hud_alert == VisualAlert.fcw
can_sends.append(gmcan.create_acc_dashboard_command(self.packer_pt, CanBus.POWERTRAIN, CC.enabled,
hud_v_cruise * CV.MS_TO_KPH, hud_control.leadVisible, send_fcw))
# Radar needs to know current speed and yaw rate (50hz),
# and that ADAS is alive (10hz)
if not self.CP.radarUnavailable:
tt = self.frame * DT_CTRL
time_and_headlights_step = 10
if self.frame % time_and_headlights_step == 0:
idx = (self.frame // time_and_headlights_step) % 4
can_sends.append(gmcan.create_adas_time_status(CanBus.OBSTACLE, int((tt - self.start_time) * 60), idx))
can_sends.append(gmcan.create_adas_headlights_status(self.packer_obj, CanBus.OBSTACLE))
speed_and_accelerometer_step = 2
if self.frame % speed_and_accelerometer_step == 0:
idx = (self.frame // speed_and_accelerometer_step) % 4
can_sends.append(gmcan.create_adas_steering_status(CanBus.OBSTACLE, idx))
can_sends.append(gmcan.create_adas_accelerometer_speed_status(CanBus.OBSTACLE, CS.out.vEgo, idx))
if self.CP.networkLocation == NetworkLocation.gateway and self.frame % self.params.ADAS_KEEPALIVE_STEP == 0:
can_sends += gmcan.create_adas_keepalive(CanBus.POWERTRAIN)
else:
# While car is braking, cancel button causes ECM to enter a soft disable state with a fault status.
# A delayed cancellation allows camera to cancel and avoids a fault when user depresses brake quickly
self.cancel_counter = self.cancel_counter + 1 if CC.cruiseControl.cancel else 0
# Stock longitudinal, integrated at camera
if (self.frame - self.last_button_frame) * DT_CTRL > 0.04:
if self.cancel_counter > CAMERA_CANCEL_DELAY_FRAMES:
self.last_button_frame = self.frame
can_sends.append(gmcan.create_buttons(self.packer_pt, CanBus.CAMERA, CS.buttons_counter, CruiseButtons.CANCEL))
if self.CP.networkLocation == NetworkLocation.fwdCamera:
# Silence "Take Steering" alert sent by camera, forward PSCMStatus with HandsOffSWlDetectionStatus=1
if self.frame % 10 == 0:
can_sends.append(gmcan.create_pscm_status(self.packer_pt, CanBus.CAMERA, CS.pscm_status))
new_actuators = actuators.copy()
new_actuators.steer = self.apply_steer_last / self.params.STEER_MAX
new_actuators.steerOutputCan = self.apply_steer_last
new_actuators.gas = self.apply_gas
new_actuators.brake = self.apply_brake
self.frame += 1
return new_actuators, can_sends